Custom Paint - Metal Mermaid |
|
[
Home Page
]
[
About Us
]
[
Customers
]
[
Contact Us
]
|
Paint Pages: |
This is for a pool gate. It's 1/4" plate cut with a torch, then it was airbrushed. |
|
I had to grind off the coating that was on the metal: |
|
Then it got 3 coats of primer/surfacer and a base of flesh tone. |
|
Next, the different colors were blocked in: |
|
Next, a few details, nothing overboard (no pun intended) |
|
Then it got 3 coats of high solids clear. |
|
Pretty basic, no real detail. I Wish I had a shot of it on the gate where it was mounted, but I never even found out the address where it was going. |
Paint Pages: |
|
|